防爆电动葫芦滑线的安装方法

Installation method of sliding wire for explosion proof electric hoist.

1、防爆电动葫芦多安装在轨道上，把钢索布置在轨道中间，工字钢上部，端部用花篮螺栓紧固。

1 、 explosion proof electric hoist is installed on the track, the steel wire is arranged in the middle of the track, the upper part of the I-beam, and the end is fastened with the flower basket bolt.

2、滑动环为两圆环相扣，有一定余量，以避免钢索刮卡。

2, the slip ring is two ring buckle, there is a certain margin, in order to avoid the cable scratch.

3、在电动机的牵引下，以转向环为中心，牵引钢索作直线或圆周运动。

3. Under the traction of the motor, the traction rope is straight or circular motion with the steering ring as the center.

4、把一个转向环一端套在钢索上，留好电动机引线后把橡套线固定在转向环下端。前端接电动机，可自由移动。后端接在电源上。

4. One end of the steering ring is sheathed on the steel cable. After the motor lead is kept, the rubber sleeve line is fixed at the lower end of the steering ring. The front end is connected with the motor and can move freely. The rear end is connected to the power supply.

以上方法简便易行，可以消除以往防爆电动葫芦滑线因接触不良、引线短路、断路而引起的一些问题。

The above method is simple and convenient, and it can eliminate some problems caused by bad contact, lead short circuit and open circuit of the explosion-proof electric hoist slip line.