很多用户朋友在使用钢丝绳电动葫芦的时候难免会碰到缠绳事故，不仅影响工作效率，而且深深困扰着我们。特别是当钢丝绳卡于滚筒与升降电机之间的缝隙时，处理的方法只能是拆下电机，取出钢丝绳。既费时，又费力，还耽误正常的生产，有时为了维持生产，将钢丝绳用气焊隔断，留下的断钢丝绳极容易磨损滚筒和电机外壳，造成更大的设备事故。
Many users and friends will inevitably encounter rope-winding accidents when using wire rope electric hoist, which not only affects work efficiency, but also deeply troubles us. Especially when the wire rope is stuck in the gap between the drum and the lifting motor, the only way to deal with it is to remove the motor and take out the wire rope. It is time-consuming, laborious and delays normal production. Sometimes in order to maintain production, steel wire rope is partitioned by gas welding. The broken steel wire rope left is very easy to wear the drum and motor casing, resulting in greater equipment accidents.
针对上述问题，经过分析研究，采用了一种简单方法，有效地解决了这个问题。在法兰盘内侧加焊一个挡圈，这样，可防止钢丝绳因各种原因卡与上述部位，同时又不影响滚筒及电机的装配以及钢丝绳电动葫芦使用新更能。我们对部分电动葫芦进行了改进，使用一年多来，彻底杜绝了钢丝绳卡缝的问题。生产过程中即使发生乱绳现象，因其只能在电动葫芦的外壳与滚筒之间，可以通过牵引、加大载重等简单方法，短时间内就可处理好。既保持了设备的使用寿命，又不影响生产的正常进行。
In view of the above problems, a simple method is adopted after analysis and research, which effectively solves the problem. Welding a retaining ring on the inside of the flange disc can prevent the wire rope from sticking to the above parts for various reasons without affecting the assembly of the baoding.75ix.cnmojusn.37ix.com.cnbxgxianwei.37ix.com.cndrum and motor and the new use of electric wire rope hoist. We have improved some electric hoists and used them for more than a year to yuniguhua.71ix.comshijiazhuang.75ix.cnyesanpo.37ix.com.cncompletely eliminate the problem of wire rope jamming. Even if there is rope disorder in the production process, because it can only be between the shell and the drum of electric hoist, it can be handled in a short time by simple methods such as traction and increasing the load. It not only maintains the service life of the equipment, but also does not affect the normal operation of production.