电动葫芦检测管理规定
1:检测重量不得小于额载的1.25倍
1: the test weight shall not be less than 1.25 times of the rated load
2:检测提升高度不低于30cm
2: the lifting height shall not be less than 30cm
3:检测负载电流不得大于1.68A
3: the detection load current shall not be greater than 1.68a
4:检测小电机确保300v低压启动,大电机确保280V,低压启动
4: detect small motor to ensure 300V low-voltage start, large motor to ensure 280v low-voltage start
5:检测整机负载噪音小电机噪音不得大于85dB,大电机噪音不得大于65dB,
5: the load noise of the whole machine shall not be greater than 85dB for small motor and 65dB for large motor,
6:检测链条的垂直度及链条的长短(长短依据生产任务单中相关要求执行)
6: check the verticality of the chain and the length of the chain (the length shall be in accordance with the relevant requirements in the production order)
7:检测外观是否干净、整洁,整体美观,无破损、丢序等问题。
7: check whether the appearance is clean and tidy, the overall appearance is beautiful, and there is no damage, loss of order and other problems.