返回首页

保定防爆电动葫芦厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
钢丝绳电动葫芦卡绳解决办法
添加时间:2019/4/29 15:32:40     浏览次数:
在使用钢丝绳电动葫芦过程中,钢丝绳会很容易的卡在滚筒和电机之间的缝隙内,导致出现卡绳的情况发生。这种时候只能是要先拆下电机才能取出钢丝绳。对于以上这种方法太费时费力,为了防止卡绳情况的发生,所以我们需要焊加一个挡圈可以有效的防止钢丝绳电动葫芦卡绳的情况发生。
In the process of using wire rope electric hoist, the wire rope will be easily stuck in the gap between the drum and the motor, resulting in the occurrence of rope jamming. In this case, the wire rope can only be removed by removing the motor first. For the above method is too time-consuming and laborious, in order to prevent the occurrence of rope jamming, we need to weld a retaining ring to effectively prevent the occurrence of wire rope electric hoist rope jamming.
1、  钢丝绳葫芦卡子的大小要适合钢丝绳的粗细,U形环的内侧净距,要比钢丝绳直径大1-3mm,净距太大不易卡紧绳子。
1. The size of the wire rope hoist clip should be suitable for the thickness of the wire rope. The inner net distance of the U-ring is 1-3 mm larger than the diameter of the wire rope. The net distance is too big to tighten the rope.
2、  使用时把U形螺栓拧紧,直到钢丝绳被压扁1/3左右为止。由于钢丝绳在受力后产生变形,绳卡在钢丝绳受力后要进行第二次拧紧,以保证接头的牢靠。如需检查钢丝绳在受力后,绳卡是否滑动,可采取附加一安全绳卡来进行。
2. Tighten the U-shaped bolt in use until the wire rope is flattened by about 1/3. Because the wire rope is deformed after being subjected to force, the wire rope must be tightened for the second time after being subjected to force to ensure the joint is firm. If it is necessary to check whether the rope clip is sliding after the wire rope is stressed, a safety rope clip can be added to it.
3、  绳卡之间的排列间距一般为钢丝绳直径的6-8倍左右,绳卡要一顺排列,将U形环部分卡在绳头一面,压板放在主绳一面。
3. The distance between the rope clips is generally 6-8 times the diameter of the rope. The rope clips fangpaow.89ix.comgangbanw.89ix.comsangna.89ix.comwenquan.89ix.comshould be arranged in a musiban.89ix.comshilongw.89ix.comstraight line. The U-ring part is clamped on one side of the rope head and the pressing plate is placed on the other side of the main rope.
通过以上方法可以使卡绳问题,从根本上解决。CD1,MD1钢丝绳电动葫芦一直是起重行业中的明星产品,用处极大。是钢丝绳电动葫芦的代表产品。
Through the above methods, the problem of rope sticking can be solved fundamentally. CD1, MD1 wire rope electric hoist has always been a star product in the lifting industry, which is of great use. It is the representative product of wire rope electric hoist.
上一页  钢丝绳电动葫芦的钢丝绳缠绕怎么解决?  
下一页  电动葫芦安装完毕后的全面检查
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3