| 电动葫芦检测管理规定 |
| 添加时间：2019/12/2 14:24:13 浏览次数： |
| 1：检测重量不得小于额载的1.25倍 1: the test weight shall not be less than 1.25 times of the rated load 2：检测提升高度不低于30cm 2: the lifting height shall not be less than 30cm 3：检测负载电流不得大于1.68A 3: the detection load current shall not be greater than 1.68a 4：检测小电机确保300v低压启动，大电机确保280V，低压启动 4: detect small motor to ensure 300V low-voltage start, large motor to ensure 280v low-voltage start 5：检测整机负载噪音小电机噪音不得大于85dB，大电机噪音不得大于65dB, 5: the load noise of the whole machine shall not be greater than 85dB for small motor and 65dB for large motor, 6：检测链条的垂直度及链条的长短（长短依据生产任务单中相关要求执行） 6: check the verticality of the chain and the length of the chain (the length shall be in accordance with the relevant requirements in the production order) 7：检测外观是否干净、整洁，整体美观，无破损、丢序等问题。 7: check whether the appearance is clean and tidy, the overall appearance is beautiful, and there is no damage, loss of order and other problems. |
| 上一页 环链电动葫芦的刹车系统是“电磁刹车” |
| 下一页 怎样分辨日本象印手拉葫芦真假 |
Copyright © 技术支持：遨游网络