| 防爆电动葫芦六项试验的具体内容 |
| 添加时间：2021/7/14 16:26:24 浏览次数： |
| 型式试验：对按照某一设计要求而制造的防爆电动葫芦所进行的试验，用以检验这一设计要求是否符合一定的规范。 Type test: the test on the explosion-proof electric hoist manufactured according to a certain design requirement to check whether the design requirement meets certain specifications. 常规试验：也叫出厂试验，对防爆电动葫芦每个器件或设备在制造中或完工后所进行的试验，用以判明器件或设备是否符合某项标准。JDG金属穿线管 不锈钢链板 隔离墩模具 检查井钢模具 流水槽模具 阶梯护坡模具 护坡砖模具 遮板模具 Routine test: also known as factory test, the test of each device or equipment of explosion-proof electric hoist during manufacturing or after completion, to determine whether the device or equipment meets a certain standard. 介质试验：是检验介质电气特性的各种试验的总称，包括：绝缘、静电、耐压等。 Dielectric test: it is the general term of all kinds of tests for testing dielectric electrical characteristics, including insulation, static electricity, withstand voltage, etc. 抽样试验：对防爆电动葫芦中随机抽取的若干样品进行试验，也是用来判明样品是否符合某项标准的。 Sampling test: a number of samples randomly selected from explosion-proof electric hoist are tested, which is also used to determine whether the samples meet a certain standard. 寿命试验：确定防爆电动葫芦在规定条件下可能达到的寿命的试验，或者是为评价分析产品的寿命特征而进行的试验，属破坏性试验。 Life test: the test to determine the possible life of explosion-proof electric hoist under specified conditions, or the test to evaluate and analyze the life characteristics of products, which is destructive test. 耐受试验：在包括一定时间内为一定目的所采取的特定运行等规定条件下，对防爆电动葫芦进行的试验，如反复操作、短路、过电压、振动、冲击等，属破坏性试验。 Withstand test: the test on explosion-proof electric hoist under specified conditions including specific operation for a certain purpose within a certain period of time, such as repeated operation, short circuit, overvoltage, vibration, impact, etc., is a destructive test. |
| 上一页 目前，电动葫芦厂面临的形势 |
| 下一页 如何正确安装防爆电动葫芦滑线 |
Copyright © 技术支持：遨游网络